MAKE BOOTABLE FLASHDISK WITHOUT SOFTWARE (FOR WINDOWS 7/8)

Indonesian Langguage click here : INDONESIA

Bootable via bootable flash including that I think is quite safe and is recommended for installing Windows. Why is that? in my opinion, a bootable via flash it reduces the presence of a corrupted file in Windows Installer itself as I've ever experienced. I've installed Windows using the DVD. At the moment I am using a DVD has been less good condition, has a lot of small scratches on the Installer DVD. but I was still forced to install it but eventually bluescreen. There are 2 things I noticed if I want to install using the Installer DVD: Seeing the condition of the DVD drive is still good and is still fluent in reading a DVD or CD disc? And the second is whether the DVD installer is still in good condition? .From What I've written above, why we chose bootable via flash? because it is easier, and reduce the presence of important files that are corrupted on windows. but this way, you should see the condition first flashdisk too well. Us directly to the subject.

 

How to create a bootable pendrive without software.
This method is the easiest for me. because we do not need to download the software and we just need the command prompt (CMD) have been provided by the windows. What are facilities if we want to create a bootable windows in flash?

1. Windows 7/8 installer that you downloaded in advance. (you can also pick up the installer from the DVD)
2. Normal flash and still the performance is still good.
3. Accuracy

The steps to create a bootable Windows without software.
Here I will give a tutorial, I will create a bootable Windows 7 :

1. Put plugs or stick to be used as a bootable windows. I recommend the flash off at first.
2. Open CMD by means of CTRL + R and typing cmd and press Enter.
3. Once you open CMD, type DISKPART Then press enter and it will display a dialog box DISKPART.
4. Type LIST DISK and press enter. In LIST DISK you will see some disk.Disk that determine hard drive and you use media such as flash (Disk 0-2 or from Disk 1- 3)​​, depending on how many hard drives (parttion) you. Continue to the next step
5. Typing SELECT DISK 2 (Disk 2 why? Because the examples that I use, I found the flash disk 2). If your flash is on Disk 2, 3, etc., please change the SELECT DISK SELECT DISK 2 to 3, 4 and so on. 
6. After that, Typing CLEAN then enter.
7. CREATE PARTITION PRIMARY typing then enter.
8. Typing SELECT PARTITION 1 and then enter.
9. ACTIVE typing then enter.
10. Typing FORMAT FS = NTFS then enter. Wait until the formatting process is complete 100%.
11. ASSIGN typing then enter and
12. Once the above step is complete, type EXIT to exit diskpart.  
13. Prepare was Installer Windows 7/8 which would you make it bootable. you can mount the ISO format installer that you downloaded using software power ISO, Daemon, and so on, or you can from the DVD installer which you have prepared and then copy all the files and folders contained in the ISO file or DVD installer into the flash (REMEMBER! Do not let anyone who is not copied).
14. After all stages of completion, please you Eject the flash that you use as a bootable Windows 7/8 then plug back. see, whether on flash drive icon that you use has turned into a windows installer Icon?

If the flash drive icon has changed, it means you successfully create a bootable via flash. To install Windows via flash, you simply change the primary boot device in your BIOS. Thank you, hopefully this article helpful and beneficial to you all.